Corroventa T2 Turbine
Corroventa
Corroventa T2 Turbine
Dries under floors and inside walls
- 180 m³/h airflow
- 260 mbar pressure
Corroventa C16 Hose System
Corroventa
Corroventa C16 Hose System
Hose kit for pressure and suction drying
A complete hose kit that connects the drying turbine to small holes drilled in floors and walls, spreading dry air evenly through the wet area.
- 10 outlets
- Ø16 mm connections
- 50 m hose
- Supplied in a bag
Daily and weekly rates – call 07971 435221 or send an enquiry
About the Corroventa C16 Hose System
The C16 hose system links a Corroventa turbine to the wet construction. Angle couplings are pressed into small pre-drilled holes and sealed, and the hoses run back to a central junction box, so dry air is spread evenly across the area, or damp air is drawn out.
With 10 outlets and a 50 m hose, it suits smaller, spread-out areas and walls. It can also be connected to the C25 junction box to extend a larger setup.
Best for
- Wall cavities and smaller floor areas
- Spreading air across several drill points
- Extending a C25 setup
Specification
| Detail | Value |
|---|---|
| Type | Hose system for pressure and suction drying |
| Junction box | 1 × 10-way (Ø16 mm) |
| Angle couplings | 10 × Ø16 mm |
| T-connectors | 2 × Ø16 mm |
| Insertion hoses | 12 |
| Hose | 1 × 50 m |
| Supplied in | Carry bag |
| Connects to | Corroventa turbines and combi machines (via hose adapter), or to the C25 junction box |
Questions about the Corroventa C16 Hose System
What is in the kit?+
A 10-way junction box, 10 angle couplings, 2 T-connectors, 12 insertion hoses and a 50 m hose, all in a carry bag.
Do I need a turbine as well?+
Yes. The hose system carries the air. The Corroventa T2 turbine moves it.
Should I choose the C16 or the C25?+
The C16 has more, smaller outlets and suits walls and smaller spread-out areas. The C25 has larger 25 mm hoses and suits bigger floor areas. We will advise which one suits your job.
Do you deliver and collect?+
Yes. We deliver and collect across Wiltshire, Swindon, Bath, Bristol, Somerset and north Dorset, within roughly an hour of Trowbridge. We can set the machine up for you, or drop it off with instructions.
How long can I hire it for?+
By the day or by the week. Weekly hire works out cheaper, and most drying jobs need at least a week. Call us and we will advise how long your job is likely to take.
How much does it cost to hire?+
Call 07971 435221 or send an enquiry and we will give you a price for your dates, including delivery.
Is the machine checked before it goes out?+
Yes. Every machine is checked before each hire.
What if it stops working during the hire?+
Switch it off at the wall and call us. We will talk you through it or swap the machine.
Can you do the drying for me instead?+
Yes. We offer a full structural drying service with moisture readings and a drying report for your insurer. Structural and building drying
Safety information
- Read the operating instructions supplied with the machine before switching on. If anything is unclear, call us first.
- Keep the machine upright. If it has been laid on its side during transport, stand it upright for at least 30 minutes before switching on.
- Plug directly into a suitable, undamaged socket. Do not use damaged leads, and if an extension lead is unavoidable, use a correctly rated one that is fully unwound.
- Use an RCD-protected supply where possible.
- Stand the machine on a firm, level surface, away from standing water.
- Keep the air inlet and outlet clear. Never cover the machine or place anything on top of it while it is running.
- Route power cables and drain hoses so they are not a trip hazard, and check the hose is not kinked or crushed.
- Keep children and pets away from the machine.
- Switch off and unplug before moving, emptying or checking the machine.
- Indoor use only. Do not use the machine outdoors or expose it to rain.
- If the machine makes an unusual noise, smells of burning, or stops working, switch it off at the wall and call us on 07971 435221. Do not open the casing or attempt repairs.
- Where electrics may have been affected by flood water, do not use any sockets until they have been checked by a qualified electrician.
Specific to this unit
- Check for hidden pipes and cables before drilling any holes.
- Keep hoses tidy and away from walkways to avoid trip hazards.
- Make sure every coupling is fully pushed in and sealed before starting the turbine.
Enquire about the Corroventa C16 Hose System
Other equipment you might need
Corroventa C25 Hose System
Corroventa
Corroventa C25 Hose System
Larger-bore hose kit for floor drying
- 6 outlets
- Ø25 mm hoses
Corroventa A2
Corroventa
Corroventa A2
Quiet desiccant dryer for cold spaces
- Up to 16 litres per day
- 16 kg